Flexible Moveble Plant
An Important fetVRE of VRE-20 flexible movable plant is the particular design as per demand of large concrete and setup to meet various site construction condition such as Congested area, Canal line, Hill slop, Inside building & Industrial area, Inside Tunnel etc.
The Plants consists comprises of "Modules"
- 3-ton capacity hopper (Three Aggregate+One Sand)
- Aggregate belt conveyer with drive.
- Pan mixer (Turbo) type.
- Load-out conveyer with drive
- Cement conveyer with storage hopper.
- Separately weighing hopper with weighing frame
- Manual Jack system.
Advantage
- No. Botheration of "PARTITION".
- Electronic control panel of plant is user's "FRIENDLY".
- Make easy "TRANSPORTATION" & "COMMISSIONING".
- Where required of concrete it should be "PROVIDE" them.
- Put "STAY" on "EXTRA COSTS"
- Cost is " EFFECTIVENESS".
- Calibration is "EASYS" & "ACCURATE"
|
Technical Data
| TYPE OF PLANT |
UNIT |
VRE-20 |
| Total weight |
Ton |
8 |
| Pan mixer (turbo) type size |
m3 |
0.5 |
Throught output
(Volume of fresh concrete with mixing
time of 30 sec. in continnious operation) |
m3/hrs |
20 |
| Concrete discharge height |
mtrs. (approx) |
3.5 |
| Maximum tourning speed |
km/hr |
22 |
Weight Capacity
Aggregate & Cement scale
Water scale
|
Kg
Ltrs |
1800
As per recipes |
| Water connection |
mm |
25 |
| Operation voltage |
Volt |
1x230/ 3x415 |
| Mains frequency |
Hz |
50 |
| Connected load for the basic unit |
KVA |
82 |
Combination of the plant
Controller : PLC base microprocessor controller (Aggregate, Cement, Water) fully auto & manual system. |
|